search

Universal R-320 Operator's Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 69
  • Table of contents
  • TROUBLESHOOTING
    •
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 27
28
SECTION
4 TROUBLESHOOTING
No power to entire system:
1. Is the emergency switch on the control enclosure pulled out?
2. Is the main switch on the control enclosure “On”?
3. Do all switches in the control enclosure have continuity? Check
with ohmmeter.
4. Is the main fuse in the control enclosure good? Check with
ohmmeter.
5. Is the master control relay in the control enclosure working?
When main switch is turned “On”, it should engage.
6. Is power at power cord? Check with ohmmeter.
No power to conveyor motor:
1. Is the conveyor switch on the control enclosure “On”?
2. Is the neutrik connector at the end of the motor cord plugged
into the junction box at the bottom of the conveyor?
3. Is the conveyor fuse in the control enclosure good? Check with
ohmmeter.
4. Is there DC voltage to motor? Check with ohmmeter.
No Power to product spacer motor:
1. Is the product spacer switch on the control enclosure “On”?
2. Is the neutrik connector at the end of the motor cord plugged
into the junction box at the bottom of the conveyor?
3. Is the product spacer fuse in the control enclosure good? Check
with ohmmeter.
4. Is there DC voltage to motor? Check with ohmmeter.
No power to turning unit motor:
1. Is the turning unit switch on the control enclosure “On”?
2. Is the neutrik connector at the end of the motor cord plugged
into the junction box at the bottom of the conveyor?
3. Is the turning unit fuse in the control enclosure good? Check
with ohmmeter.
4. Is there DC voltage to motor? Check with ohmmeter.
No power to applier:
1. Is the applier switch on the control enclosure “On”?
2. Is the motor switch on the applier “On”?
3. Is the applicator fuse in the control enclosure good? Check with
ohmmeter.
4. Is the fuse in the applicator good? Check with ohmmeter.
5. Is the neutrik connector at the end of the motor cord plugged
into the junction box at the bottom of the conveyor?
6. Is there DC voltage to motor? Check with ohmmeter.
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 68 69

Comments to this Manuals

No comments
Related products and manuals for Label printers Universal R-320
Label printers Universal R-320 Operations Instructions      (117 pages)
  • Straight-ahead Desa Flyzone Multidyne Blueshape
  • Arkon Holders Savo Cooker hoods Audiovox Navigators Ferrari Cars Jamo Unknown
  • Epson NX100 Indesit IWDE 7105 B (EU) Sony MHC-RX77 Minolta DIMAGE SCAN ELITE Philips 190S7FG/00
  • ADJ ULTRA GO PAR7X User Manual Pioneer AVH-P5100DVD User Manual LockState LS-90i Use and Care Manual Jvc KD-R731 User Manual